FAQ: questions and answers about BigLeaf SD-WAN

How does same-IP failover work? Does BigLeaf work with my firewall? What does it cost? Find technically sound answers here – without marketing promises.

Basics

What is BigLeaf Networks?

Bigleaf Networks, Inc. is a US provider of a cloud-first SD-WAN service. The solution – called Bigleaf Cloud Connect by the manufacturer – optimises a site's existing internet circuits, fails over automatically and prioritises business-critical applications. In German-speaking countries, RIGG GmbH (Diespeck, Germany) distributes BigLeaf through IT service providers and MSPs. More about BigLeaf and RIGG

How does BigLeaf SD-WAN work?

BigLeaf uses a split architecture: a pre-configured BigLeaf router is installed at the site in front of the existing firewall and connected to up to four internet circuits. Over each circuit it builds a tunnel to the gateway clusters in the Bigleaf Cloud Access Network. Each circuit is measured ten times per second in both directions, and every data flow is placed on the circuit that suits it. Your public IP address is issued by Bigleaf, so it does not change when a circuit fails. Technology in detail

What is the Bigleaf Cloud Access Network?

The Cloud Access Network is Bigleaf's own backbone. According to the manufacturer it comprises 12 points of presence (POPs) in the United States and Western Europe, has redundancy built into every part (multiple core routers, servers and transit circuits) and peers with more than 150 cloud, content and carrier networks. The gateway clusters terminate the tunnels from your site and are where your public IP address lives.

Which company sizes is BigLeaf suitable for?

The manufacturer describes the range as anything from a single office or kiosk to multi-location enterprises. What matters is less headcount than dependence on the internet: if telephony, Microsoft 365, ERP, POS or remote access stop without a stable connection, BigLeaf is worth evaluating. See use cases

Resilience & failover

What happens when an internet circuit fails?

BigLeaf detects the outage through its continuous measurements and automatically moves the affected flows to the remaining circuits. Because the public IP address comes from Bigleaf rather than the provider, active sessions – such as VoIP calls, VPN tunnels or cloud applications – stay up according to the manufacturer. This requires at least one other working circuit at the site.

Does my public IP address stay the same?

Yes. Your site receives a Bigleaf-issued public IPv4 address or IP block. It is independent of the individual providers and stays the same on every circuit switch (same-IP failover). During rollout, services that previously allow-listed your provider IP are switched to the new address once. How same-IP failover works

What is the difference between BigLeaf and classic dual-WAN?

A dual-WAN router or firewall controls traffic only at its own site and uses the providers' IP addresses. On failover the public IP therefore changes and sessions drop. It can usually prioritise only outbound traffic. BigLeaf extends control into its own Cloud Access Network: prioritisation works in both directions, the public IP stays the same, and quality degradation short of a full outage is taken into account. See the full comparison

Do I need several internet providers?

Not necessarily. According to the manufacturer, BigLeaf can also run on a single circuit and then provides prioritisation, visibility and the backbone network. For automatic failover you need at least two circuits. Different providers and media – such as fibre plus 5G – are recommended so that a single cable cut or provider incident does not hit both circuits.

Does BigLeaf also help with fluctuating line quality?

Yes. Many problems are not full outages but higher latency, jitter or packet loss. BigLeaf measures these values continuously and moves flows when a circuit no longer meets an application's needs – before users notice a problem.

Technology & installation

Can BigLeaf work with my existing firewall?

Yes. The BigLeaf router is installed outside – in front of – the firewall and works with any existing network infrastructure. The firewall's WAN port is configured with the IP address, subnet mask and gateway from the Bigleaf IP block. Rule sets, VPNs and your security concept remain under your control.

How is BigLeaf installed?

The router ships pre-configured with your circuit details. On site, the circuits are plugged into the router and the firewall is pointed at the Bigleaf addresses; the manufacturer describes a plug-and-play installation done in minutes. No manual policies are required. With RIGG and your IT partner, rollout follows four steps: analysis, pre-configuration, go-live and monitoring.

Which access types does BigLeaf support – including fibre and LTE/5G?

BigLeaf is provider-neutral and, according to the manufacturer, combines any mix of fibre, cable, DSL/broadband, LTE/5G, fixed wireless and LEO satellite (e.g. Starlink). Up to four circuits can be connected per router. Note: the manufacturer's own Wireless Connect data plans are available in the USA only; in Germany, Austria and Switzerland you connect your own mobile contract as a circuit.

Is there redundancy for the router itself?

Yes. The manufacturer offers two hardware options: High Availability with two bridged routers running in parallel, where the second takes over immediately, and Warm Spare with a pre-configured secondary router that automatically takes over if the primary becomes unavailable.

How does BigLeaf improve VoIP and Microsoft Teams quality?

Three mechanisms work together: Dynamic QoS automatically detects voice and video and prioritises it in both directions – including the return path from the internet, which a local firewall cannot control. Intelligent load balancing places voice and video on the circuit with the lowest latency, jitter and packet loss. Same-IP failover prevents calls from dropping when circuits switch. VoIP & Teams

Which monitoring functions are available?

The Cloud Connect dashboard shows all sites and circuits with latency, jitter, packet loss and capacity, sends alert emails when problems occur and provides troubleshooting tools. According to the manufacturer, the Q3 2026 update added uptime and optimisation widgets and richer site overviews. About the dashboard

Does BigLeaf change my network security or replace the firewall?

No. In the standard installation BigLeaf sits in front of your firewall and does not touch its rules. Since Q3 2026 the manufacturer additionally offers the optional Edge Firewall add-on with stateful inspection and site-to-site VPN – for example for branches without their own firewall. Edge Firewall

Does BigLeaf work with AWS, Azure and other clouds?

Yes. Optimisation applies to all internet traffic from a site and therefore to Microsoft 365, Microsoft Azure, Amazon Web Services and other cloud and SaaS services – whichever service you use. Nothing needs to be installed at the cloud provider. According to the manufacturer, the Cloud Access Network peers with more than 150 cloud, content and carrier networks.

Partners, pricing & support

How can I offer BigLeaf as an IT service provider or MSP?

In German-speaking countries through RIGG GmbH. RIGG supports partners in sales and engineering – from customer presentations and proof of concept to post-sales support. On the manufacturer side, partners get a multi-tenant console, training and marketing material. We discuss commercial terms in a personal conversation. See the partner programme

How much does BigLeaf cost?

BigLeaf is billed as a monthly service per site. According to the manufacturer, every plan includes router hardware, traffic optimisation, failover, a dedicated public IPv4 address, the dashboard and 24/7 support; the price depends mainly on the chosen symmetric bandwidth package and the term. Specific prices for Germany, Austria and Switzerland are provided individually on request – depending on sites, circuits and requirements.

What support is included?

On the manufacturer side, Bigleaf Connect Care is included in every service plan: 24/7 support across multiple channels, including fully managed device configuration. In German-speaking countries, RIGG additionally supports service providers and their customers technically in pre-sales and post-sales.