Business internet that keeps going.

BigLeaf combines your existing internet circuits into one intelligently managed connection. Critical applications get priority – and if a circuit fails, your public IP address stays the same.

Circuits
up to 4 per site, any provider
Installation
Plug & play in front of your firewall
On outage
Same-IP failover
Route map: how your traffic flows with BigLeafThe company network connects through the existing firewall to the BigLeaf router. The router uses three internet circuits from different providers – fibre, DSL/cable and LTE/5G or Starlink – and builds a tunnel over each to the gateway cluster in the Bigleaf Cloud Access Network. There the traffic receives a Bigleaf-issued public IP address and reaches cloud services such as Microsoft 365, VoIP and AWS or Azure. If one circuit fails, traffic uses the remaining circuits; the public IP stays the same. Your site Internet – any providers Bigleaf cloud Destinations Fibre – provider A DSL/cable – provider B LTE/5G/Starlink – provider C Company networkClients, phones, servers Your firewallstays as it is BigLeaf routeroutside the firewall – up to 4 circuits Gateway clusterCloud Access Network Tunnel per circuit – 10 measurements/s Public IP (Bigleaf)198.51.100.24 stays the same onevery switchover SaaS & Microsoft 365 VoIP & UC AWS, Azure & web Route map: how your traffic flows with BigLeafThe company network connects through the existing firewall to the BigLeaf router. The router uses three internet circuits from different providers – fibre, DSL/cable and LTE/5G or Starlink – and builds a tunnel over each to the gateway cluster in the Bigleaf Cloud Access Network. There the traffic receives a Bigleaf-issued public IP address and reaches cloud services such as Microsoft 365, VoIP and AWS or Azure. If one circuit fails, traffic uses the remaining circuits; the public IP stays the same. Your site Internet Bigleaf cloud Fibre DSL/cable LTE/5G/Starlink Company networkClients, phones, servers Your firewallstays as it is BigLeaf routeroutside the firewall – up to 4 circuits Tunnel per circuit10 measurements/s Gateway clusterCloud Access Network Public IP (Bigleaf)198.51.100.24 stays the same onevery switchover Cloud & internetMicrosoft 365, VoIP, AWS, Azure
All three circuits active – traffic distributed per flow FibreDSL/cableLTE/5G/StarlinkSimplified illustration

When the internet falters, business stops.

Telephony, Microsoft 365, ERP, POS and remote access all run over the internet today. Typical incidents – and what BigLeaf does about them:

  • Internet outage

    Digger, provider incident, maintenance window: with a single circuit, operations stop.

    Automatic failover to further circuits from other providers – with the same public IP.Requires at least a second circuit.

  • Fluctuating line quality

    The circuit is “online”, but latency, jitter and packet loss make applications unusable.

    10 measurements per second per circuit and direction; affected flows are moved before users notice.

  • Choppy VoIP and Teams calls

    Robotic voices, frozen video, dropped customer meetings.

    Dynamic QoS prioritises real-time traffic in both directions; voice runs over the best circuit at any time.

  • Unstable cloud, ERP and CRM connections

    Microsoft 365, ERP or merchandise systems hang, sessions drop, transactions get lost.

    Sessions survive because the IP does not change on switchover; cloud traffic runs via the Cloud Access Network.Cannot fix problems of the cloud service itself.

  • Dependence on one provider

    One contract, one cable, one trouble ticket – and waiting.

    Provider-neutral: any mix of fibre, DSL, cable, LTE/5G and Starlink or other satellite links.

  • No visibility during incidents

    Is it Wi-Fi, the firewall, the provider or the cloud? Troubleshooting costs hours.

    Cloud Connect dashboard with quality data per circuit, alerts and history across all sites.

How your traffic flows with BigLeaf

As in the route map above: the routes split across your circuits at the BigLeaf router and rejoin at the gateway cluster in the cloud. Four steps explain the principle.

  1. Router in front of the firewall

    The pre-configured BigLeaf router takes up to four internet circuits. Your firewall stays as it is.

  2. A tunnel over every circuit

    A tunnel is built over every circuit to the gateway clusters of the Bigleaf Cloud Access Network. All traffic flows through it.

  3. Measure and steer

    Every circuit is measured 10× per second in both directions. Each flow takes the circuit that suits it, real time gets priority.

  4. One IP to the outside

    Your traffic exits to the internet at the gateway cluster with a Bigleaf-issued IP – no matter which circuit is carrying it.

Bigleaf layer model: traffic sources such as VoIP, SaaS, Office 365, AWS and VPN run via the Bigleaf Cloud Access Network and the Bigleaf on-site router with up to four ISP circuits to the customer's firewall. Dynamic QoS, intelligent load balancing and same-IP failover work in between.
Architecture graphic by Bigleaf Networks (original graphic; previously used on bigleaf.de/rigg.it)

View technical details

Six features, one job: keep your applications running.

The features work together automatically. No policies to write, no circuits to switch by hand.

Circuit A – outage Circuit B takes over Circuit A – active Circuit B – active IP 198.51.100.24 stays Illustration – documentation example IP
Same-IP failover

Circuit gone, call stays.

If a circuit fails or its quality collapses, traffic moves automatically to the remaining circuits. Because your public IP address comes from Bigleaf rather than the provider, it stays the same – according to the manufacturer, VoIP calls, VPN tunnels and cloud sessions continue without reconnecting.

Your benefitNo dropped calls, no re-login, no allow-list issues when providers switch.
More about Same-IP failover
VoIP & video → lowest latency Downloads → most capacity Illustration – assignment per flow
Intelligent Load Balancing

Every flow on its best line.

BigLeaf distributes traffic per flow: voice and video calls run over the circuit with the lowest latency, jitter and packet loss, high-throughput tasks over the circuit with the most available bandwidth. All circuits work actively – none sits idle in reserve.

Your benefitYou use the bandwidth you pay for and get better quality for critical applications.
More about Intelligent Load Balancing
VoIP & videoSaaS & remote desktopWeb & emailUpdates & backups Priority – no manual rules
Dynamic QoS

Real time goes first. In both directions.

BigLeaf identifies traffic types in real time and prioritises them automatically based on actual circuit throughput – without manually maintained rules. Because prioritisation extends into the Cloud Access Network, it also applies to download traffic that a local firewall cannot control.

Your benefitClear audio in Teams meetings, even while large updates run in parallel.
More about Dynamic QoS
10 measurements per second – both directions LatencyJitterPacket lossCapacity Metrics according to the manufacturer
Real-time circuit monitoring

Ten measurements per second.

Each circuit is monitored end-to-end to the gateway clusters. According to the manufacturer, latency, jitter, packet loss and capacity are measured ten times per second in both directions – the basis for every routing decision and for end-to-end diagnostics.

Your benefitYou see which provider had problems and when – solid evidence for provider discussions.
More about Real-time circuit monitoring
Map of Bigleaf points of presence in North America and Europe (graphic: Bigleaf Networks)
Cloud Access Network

Its own backbone right up to the cloud.

Bigleaf's gateway clusters terminate your tunnels. According to the manufacturer: 12 points of presence in the USA and Western Europe, redundancy in every part of the network and peering with more than 150 cloud, content and carrier networks for direct connections to cloud applications.

Your benefitControl over the whole path – not just up to your property line.
More about Cloud Access Network
Cloud Connect – SitesHeadquartersBranch northBranch southWarehouse Schematic illustration – not an original screenshot
Cloud Connect Dashboard

All sites, all circuits, one view.

The dashboard shows availability, quality metrics and events per site and circuit, sends alert emails and provides troubleshooting tools. Since the Q3 2026 update, new widgets show uptime and optimisation activity over time.

Your benefitLess time troubleshooting, faster answers for users and management.
More about Cloud Connect Dashboard

All features at a glance

Try it: disrupt a circuit, see the effect.

Set one or more circuits to “degraded” or “down”. The status board shows how BigLeaf reroutes traffic – and, if you like, what a classic dual-WAN would do in the same situation.

Route map: how your traffic flows with BigLeafThe company network connects through the existing firewall to the BigLeaf router. The router uses three internet circuits from different providers – fibre, DSL/cable and LTE/5G or Starlink – and builds a tunnel over each to the gateway cluster in the Bigleaf Cloud Access Network. There the traffic receives a Bigleaf-issued public IP address and reaches cloud services such as Microsoft 365, VoIP and AWS or Azure. If one circuit fails, traffic uses the remaining circuits; the public IP stays the same. Your site Internet – any providers Bigleaf cloud Destinations Fibre – provider A DSL/cable – provider B LTE/5G/Starlink – provider C Company networkClients, phones, servers Your firewallstays as it is BigLeaf routeroutside the firewall – up to 4 circuits Gateway clusterCloud Access Network Tunnel per circuit – 10 measurements/s Public IP (Bigleaf)198.51.100.24 stays the same onevery switchover SaaS & Microsoft 365 VoIP & UC AWS, Azure & web Route map: how your traffic flows with BigLeafThe company network connects through the existing firewall to the BigLeaf router. The router uses three internet circuits from different providers – fibre, DSL/cable and LTE/5G or Starlink – and builds a tunnel over each to the gateway cluster in the Bigleaf Cloud Access Network. There the traffic receives a Bigleaf-issued public IP address and reaches cloud services such as Microsoft 365, VoIP and AWS or Azure. If one circuit fails, traffic uses the remaining circuits; the public IP stays the same. Your site Internet Bigleaf cloud Fibre DSL/cable LTE/5G/Starlink Company networkClients, phones, servers Your firewallstays as it is BigLeaf routeroutside the firewall – up to 4 circuits Tunnel per circuit10 measurements/s Gateway clusterCloud Access Network Public IP (Bigleaf)198.51.100.24 stays the same onevery switchover Cloud & internetMicrosoft 365, VoIP, AWS, Azure

Control circuits

Fibre
DSL/cable
LTE/5G/Starlink
Active circuitsFibre + DSL/cable + LTE/5G/Starlink
VoIP & video viaFibre
Downloads & updates viaall active
Public IP198.51.100.24

Normal operation: all circuits carry traffic. Voice and video run over the circuit with the best quality.

Classic dual-WAN: the primary circuit carries traffic, the backup waits unused.

Simplified illustration of the principle – no measurement data, no performance commitment. The IP address is from a documentation range (RFC 5737). The circuit order is an example assumption.

BigLeaf compared

Two circuits are not yet resilience. What matters is where traffic is controlled and which IP address is visible to the outside.

Simplified, general comparison of typical solution classes; individual products may differ. BigLeaf details according to the manufacturer (bigleaf.net, retrieved 11/2026).
CriterionSingle internet circuitClassic dual-WAN failoverTraditional WAN (e.g. MPLS)BigLeaf SD-WAN
Automatic failoverNo: No alternative during an outagePartly: Yes, usually only on a full outage (link or ping check)Partly: Depends on the provider's redundancy design; often needs an extra backup lineYes: Yes, also on quality degradation, per flow
IP address continuityNo: Provider IP, unreachable during an outageNo: Public IP changes with the provider – sessions dropPartly: Internal addressing stable; internet breakout depends on designYes: Bigleaf-issued public IP stays the same
Intelligent path selectionNo: Not availablePartly: Rule-based, statically configuredPartly: Routing defined by the providerYes: Per flow based on continuous measurements
Real-time monitoringPartly: Depends on the router, usually basicPartly: Basic reachability checksPartly: Provider portal, usually limited to its own networkYes: Latency, jitter, packet loss, capacity – 10× per second, both directions
Dynamic prioritisationNo: NonePartly: Static QoS rules, mostly outbound onlyPartly: Class-based QoS within the provider network, configured manuallyYes: Dynamic QoS, automatic, in both directions
Firewall integrationPartly: Firewall directly behind the provider routerPartly: Function usually inside the firewall – changing it means redesignPartly: Separate security architectureYes: In front of any existing firewall, without touching its rules
Administration effortYes: Low – but without protectionPartly: Medium: rules, tests, provider coordinationNo: High: contracts, change processes, long lead timesYes: Low: pre-configured, no manual policies (manufacturer)
Cloud optimisationNo: NoneNo: NonePartly: Cloud traffic often backhauled via a central siteYes: Via Cloud Access Network peering with 150+ networks

Comparison in detail

For IT service providers and MSPs: offer BigLeaf.

RIGG GmbH is the distributor of Bigleaf Networks for Germany, Austria and Switzerland. We support you from the first customer conversation through proof of concept to post-sales support.

Top MSP Partner & Highest Growth Partner 2023Award to RIGG GmbH by Bigleaf Networks (according to rigg.it)
  • More reliable customer networksFewer outages and quality problems at the customers you look after.
  • Less effort on WAN problemsAutomatic failover instead of night-time call-outs; measurements instead of guesswork.
  • Central visibilityMulti-tenant console with alerting across all customer sites (manufacturer).
  • Recurring service revenueMonthly service per site – a natural fit for managed service contracts.
  • Existing firewalls stayInstallation in front of any firewall – no change to the customer's security concept.
  • Standardised implementationPre-configured routers, the same procedure at every site.

In practice: voices and scenarios

We currently have no approved customer references for German-speaking countries. We therefore show published voices of Bigleaf customers in the USA and typical scenarios – clearly labelled.

“Bigleaf saves my IT team so much time. Instead of spending hours troubleshooting and resolving problems, we can look at the Bigleaf Web Dashboard to identify and address the source of a faulty connection.”

Director of Infrastructure and OperationsHanna Andersson (USA) – Customer quote as published by the manufacturer (bigleaf.net)

“We couldn’t have asked for a simpler solution. Bigleaf was easily integrated into the existing network edge.”

John PentlinTruHome (USA) – Customer quote as published by the manufacturer (bigleaf.net)

“Our team gets to focus on finding innovative new solutions for DP Fox’s growing business landscape instead of playing whack-a-mole with Internet issues.”

Grant ZondervanDP Fox (USA) – Customer quote as published by the manufacturer (bigleaf.net)
Use-case scenario – not a customer project

Example: tax practice with cloud telephony

Fibre plus a 5G router. If the fibre fails, everyone keeps calling over 5G – phone numbers and the PBX's public IP stay unchanged.

Use-case scenario – not a customer project

Example: retailer with 40 sites

Whatever circuits are available at each branch, one dashboard for HQ. Tills and card payments first, updates later.

Use-case scenario – not a customer project

Example: manufacturer with cloud ERP

Two providers, both active. ERP sessions survive circuit switches, large CAD uploads use the free bandwidth.

Frequently asked questions

Technically sound answers – for IT management, administrators and procurement.

See all questions

What is BigLeaf Networks?

Bigleaf Networks, Inc. is a US provider of a cloud-first SD-WAN service. The solution – called Bigleaf Cloud Connect by the manufacturer – optimises a site's existing internet circuits, fails over automatically and prioritises business-critical applications. In German-speaking countries, RIGG GmbH (Diespeck, Germany) distributes BigLeaf through IT service providers and MSPs. More about BigLeaf and RIGG

How does BigLeaf SD-WAN work?

BigLeaf uses a split architecture: a pre-configured BigLeaf router is installed at the site in front of the existing firewall and connected to up to four internet circuits. Over each circuit it builds a tunnel to the gateway clusters in the Bigleaf Cloud Access Network. Each circuit is measured ten times per second in both directions, and every data flow is placed on the circuit that suits it. Your public IP address is issued by Bigleaf, so it does not change when a circuit fails. Technology in detail

What happens when an internet circuit fails?

BigLeaf detects the outage through its continuous measurements and automatically moves the affected flows to the remaining circuits. Because the public IP address comes from Bigleaf rather than the provider, active sessions – such as VoIP calls, VPN tunnels or cloud applications – stay up according to the manufacturer. This requires at least one other working circuit at the site.

Does my public IP address stay the same?

Yes. Your site receives a Bigleaf-issued public IPv4 address or IP block. It is independent of the individual providers and stays the same on every circuit switch (same-IP failover). During rollout, services that previously allow-listed your provider IP are switched to the new address once. How same-IP failover works

What is the difference between BigLeaf and classic dual-WAN?

A dual-WAN router or firewall controls traffic only at its own site and uses the providers' IP addresses. On failover the public IP therefore changes and sessions drop. It can usually prioritise only outbound traffic. BigLeaf extends control into its own Cloud Access Network: prioritisation works in both directions, the public IP stays the same, and quality degradation short of a full outage is taken into account. See the full comparison

Do I need several internet providers?

Not necessarily. According to the manufacturer, BigLeaf can also run on a single circuit and then provides prioritisation, visibility and the backbone network. For automatic failover you need at least two circuits. Different providers and media – such as fibre plus 5G – are recommended so that a single cable cut or provider incident does not hit both circuits.

Can BigLeaf work with my existing firewall?

Yes. The BigLeaf router is installed outside – in front of – the firewall and works with any existing network infrastructure. The firewall's WAN port is configured with the IP address, subnet mask and gateway from the Bigleaf IP block. Rule sets, VPNs and your security concept remain under your control.

How is BigLeaf installed?

The router ships pre-configured with your circuit details. On site, the circuits are plugged into the router and the firewall is pointed at the Bigleaf addresses; the manufacturer describes a plug-and-play installation done in minutes. No manual policies are required. With RIGG and your IT partner, rollout follows four steps: analysis, pre-configuration, go-live and monitoring.

Which access types does BigLeaf support – including fibre and LTE/5G?

BigLeaf is provider-neutral and, according to the manufacturer, combines any mix of fibre, cable, DSL/broadband, LTE/5G, fixed wireless and LEO satellite (e.g. Starlink). Up to four circuits can be connected per router. Note: the manufacturer's own Wireless Connect data plans are available in the USA only; in Germany, Austria and Switzerland you connect your own mobile contract as a circuit.

How does BigLeaf improve VoIP and Microsoft Teams quality?

Three mechanisms work together: Dynamic QoS automatically detects voice and video and prioritises it in both directions – including the return path from the internet, which a local firewall cannot control. Intelligent load balancing places voice and video on the circuit with the lowest latency, jitter and packet loss. Same-IP failover prevents calls from dropping when circuits switch. VoIP & Teams

How can I offer BigLeaf as an IT service provider or MSP?

In German-speaking countries through RIGG GmbH. RIGG supports partners in sales and engineering – from customer presentations and proof of concept to post-sales support. On the manufacturer side, partners get a multi-tenant console, training and marketing material. We discuss commercial terms in a personal conversation. See the partner programme

How much does BigLeaf cost?

BigLeaf is billed as a monthly service per site. According to the manufacturer, every plan includes router hardware, traffic optimisation, failover, a dedicated public IPv4 address, the dashboard and 24/7 support; the price depends mainly on the chosen symmetric bandwidth package and the term. Specific prices for Germany, Austria and Switzerland are provided individually on request – depending on sites, circuits and requirements.

Ready for a more reliable internet connection?

Talk to our team about your sites and circuits. We show BigLeaf in a live demo and check how it fits into your existing infrastructure.